|
|
 |
| Before I get to my questions I want to tell you that the pre-glued red oak I have been ordering from you is terrific. The first project was finished with a water-based poly in natural finish and looks.....MORE Alan |
|
|
|
|
|
5540-747*100 100 Of The Best Drill In Cabinet Door Bumper Pads
Larger View
- 100 DRILL IN BUMPER PADS.
- If you have used the traditional bumper pads before you know the nightmares associated with them. Finding them on the floor, moving down the door, getting knocked off when cleaning are just a few.
- With these Drill in Bumper Pads many of the OLD problems are rectified.
- Easy to install with a 3/16 inch drill bit and electric or cordless drill. Use a drill depth stop or wrap tape on the bit if drilling the door.
- When installed they look like a normal Door Bumper Pad as the ribbed dowel that is molded to the Pad is inserted in the drilled hole.
- Clear in Color.
- 10mm (3/8 inch) Diameter.
- Requires a 5mm (3/16 inch) Diameter Hole ¼ inch deep.
- 100 pads per Sheet.
- FOR USE ON WOOD, VINYL OR METAL CABINET DOORS TO GET THAT QUIET SOFT CLOSING SOUND.
| |
|
|
|
|
